Installation Instructions
1. For safe installation, maintenance, and inspection of the light fixture, please entrust the work to a qualified electrical professional. Non-professional work may result in hazards.
2. Do not install the light fixture in the locations shown. This light fixture is designed for ceiling mounting.
3. Do not use in parallel with a dimmer to avoid malfunction. Do not install above high-temperature objects or in damp locations.
4. Do not use a light source exceeding the specified maximum wattage. Please refer to the wattage sticker on the product. Under no circumstances should the light fixture be covered by heat-insulating pads or similar materials.
5. Ensure there is a 75mm ventilation hole around this product. The use of this light fixture must not violate any fire safety regulations. Always disconnect the power supply and confirm the light source is correctly installed before maintenance, installation, or replacement of the light source.
Installation Instructions
1. Remove the grid reflector from the light fixture. Handle it gently to avoid scratching. Place the light fixture onto the pre-installed ceiling joists. Ensure all four sides of the fixture rest completely on the joists to prevent it from falling. If the fixture is heavy, use a wire to suspend it from the ceiling.
2. Thread the power cord through the outlet hole and connect it correctly to the terminal block. Connect the live wire (L), neutral wire (N), and ground wire (G), respectively.
3. Install the light source correctly. Ensure the light source clicks into the lamp holder slot. A click indicates good contact between the light source and the lamp holder's copper contacts.
4. Secure one end of the grid reflector's sling to the sling hole in the light fixture for easy light source replacement. Insert the grid reflector into the light fixture. Ensure the spring clips make good contact with the grid reflector to prevent it from falling off.
5. Turn on the switch and the light will turn on, indicating that the installation is complete.
